Operation; Making A Call; Receiving A Call; Redial - Doro DECT 160 User Manual

Making a Call

1. Enter the desired number. Mistakes can be erased using C.
2. Press
q
3. Press
q
Please note!
If the telephone cannot connect to a line, a warning signal will be heard. The problem may
be due to the battery running low, the handset being too far from the base unit or all of the
transmission channels being engaged.

Receiving a Call

1. Wait for the handset to ring.
2. Press
q
3. Press
q
Redial button
The ten most recently dialled numbers can easily be redialled using
1. Press , the most recently dialled number is shown in the display.
r
2. Press +/- (on the side) repeatedly, to browse through the numbers
3. Press
q

Volume Control

The volume may be adjusted during a call using +/- (on the side of the
handset).The display will show up to four volume settings.
Handset Locator/Paging
By pressing
signal of the handset will be activated. This function is used to help find the
handset or to page the person carrying the handset.
www.doro.com
DECT160-360_20010530.indd

Operation

and the number is dialled.
to terminate the call.
to answer the call.
to terminate the call.
, and the number is dialled.
on the base unit (located behind the charge pins), the paging
8-9
English
:
r
2001-05-30, 11:29
9