Commands Level - Planet FGSW-2620VM User Manual
24-port 10/100mbps + 2 gigabit tp/sfp layer 2 managed switch 24-port 10/100mbps + 2 gigabit tp/sfp managed poe switch 24-port 10/100mbps + 2 gigabit tp/sfp with 12-port poe managed switch 24-port 10/100mbps + 2 gigabit tp/sfp managed ethernet switch
Hide thumbs
Also See for FGSW-2620VM:
- User manual (199 pages) ,
- Specification (3 pages) ,
- Quick installation manual (2 pages)
Table of Contents
Advertisement
5.3 Commands Level
The following table lists the CLI commands and description.
Modes
Begin a session
User EXEC
with your switch.
Enter the enable
Privileged
command while in
EXEC
User EXEC mode.
Enter the configure
Global
command while in
Configuration
privileged EXEC
mode.
Access Method
Prompt
switch>
switch#
switch (config)#
User's Manual of FGSW-Series
Exit Method
Enter logout or
quit.
Enter disable to
exit.
To exit to
privileged EXEC
mode, enter exit
or end
130
About This Mode1
The user commands available
at the user level are a subset of
those available at the
privileged level.
Use this mode to:
• Perform basic tests.
• Display system information.
The privileged command is the
advanced mode.
Use this mode to
• Display advanced function
status
• Save configuration
Use this mode to configure
those parameters that are
going to be applied to your
switch.
Advertisement
Table of Contents
