Tos/Dscp Configuration - Planet FGSW-2620VM User Manual
24-port 10/100mbps + 2 gigabit tp/sfp layer 2 managed switch 24-port 10/100mbps + 2 gigabit tp/sfp managed poe switch 24-port 10/100mbps + 2 gigabit tp/sfp with 12-port poe managed switch 24-port 10/100mbps + 2 gigabit tp/sfp managed ethernet switch
Hide thumbs
Also See for FGSW-2620VM:
- User manual (199 pages) ,
- Specification (3 pages) ,
- Quick installation manual (2 pages)
Table of Contents
Advertisement
4.9.3.1 TOS/DSCP Configuration
The TOS/DSCP page provides fields for defining output queue to specific DSCP fields. When TCP/IP's TOS/DSCP mode is
applied, the Managed Switch recognizes TCP/IP Differentiated Service Codepoint (DSCP) priority information from the
DS-field defined in RFC2474.
Enable TOS/DSCP for traffic classification and then the DSCP to priority mapping column is configurable, as the
4-9-5
shows:
The page includes the following fields:
Object
TOS/DSCP
DSCP
Priority
Figure 4-9-5: QoS Configuration – TOS Priority
Description
Enable / Disable internal traffic class ( 0~7) to map the corresponding IP DSCP
value.
The values of the IP DSCP header field within the incoming packet.
0~63.
Specify which 802.1p priority to map the corresponding IP DSCP.
The value is 0~7.
107
User's Manual of FGSW-Series
Figure
Advertisement
Table of Contents
