Ip Default-Gateway; Show Ip; Show Info; Dhcp - Planet FGSW-2620VM User Manual
24-port 10/100mbps + 2 gigabit tp/sfp layer 2 managed switch 24-port 10/100mbps + 2 gigabit tp/sfp managed poe switch 24-port 10/100mbps + 2 gigabit tp/sfp with 12-port poe managed switch 24-port 10/100mbps + 2 gigabit tp/sfp managed ethernet switch
Hide thumbs
Also See for FGSW-2620VM:
- User manual (199 pages) ,
- Specification (3 pages) ,
- Quick installation manual (2 pages)
Table of Contents
Advertisement
ip default-gateway
Description:
Set the default gateway IP address.
Syntax:
ip default-gateway <ip-addr>
show ip
Description:
Show IP address, subnet mask, and the default gateway.
show info
Description:
Show basic information, including system info, MAC address, and versions.
Switch(config)# show info
Model name: FGSW-2620VM
Description: 24-Port 10/100Mbps + 2G TP/SFP Combo Managed Switch
MAC address: 00:30:4F:44:55:66
Firmware version: 2.08
CLI version: 1.07
802.1x: disabled
IGMP: enabled
LACP: enabled
dhcp
Description:
Set switch as dhcp client, it can get ip from dhcp server.
If you set this command, the switch will reboot.
show dhcp
Description:
show dhcp enable/disable.
User's Manual of FGSW-Series
149
Advertisement
Table of Contents
