Q-In-Q Port Setting - Planet FGSW-2620VM User Manual
24-port 10/100mbps + 2 gigabit tp/sfp layer 2 managed switch 24-port 10/100mbps + 2 gigabit tp/sfp managed poe switch 24-port 10/100mbps + 2 gigabit tp/sfp with 12-port poe managed switch 24-port 10/100mbps + 2 gigabit tp/sfp managed ethernet switch
Hide thumbs
Also See for FGSW-2620VM:
- User manual (199 pages) ,
- Specification (3 pages) ,
- Quick installation manual (2 pages)
Table of Contents
Advertisement
4.4.5.1 Q-in-Q Port Setting
The QinQ VLAN \ QinQ Port Setting screen in
The page includes the following fields:
Object
QinQ
QinQ TPID
Port QinQ
QinQ Uplink
Figure 4-4-8
Figure 4-4-8: Q-in-Q Port Setting interface
Description
Enable:
Sets the Managed Switch to QinQ mode, and allows the QinQ tunnel port to
be configured.
Disable:
The Managed Switch operates in its normal VLAN mode.
The default is for the Managed Switch to function in Disable mode.
The Tag Protocol Identifier (TPID) specifies the ethertype of incoming packets on a
tunnel access port.
• 802.1Q Tag : 8100
• vMAN Tag : 88A8
Default : 802.1Q Tag.
Check: Sets the Port to QinQ mode. Or the port operates in its normal VLAN mode.
Default: Un-check.
Check:
Configures IEEE 802.1Q tunneling (QinQ) for an uplink port to another device
within the service provider network.
User's Manual of FGSW-Series
appears.
74
Advertisement
Table of Contents
