Configure Ip Address - Planet FGSW-2620VM User Manual
24-port 10/100mbps + 2 gigabit tp/sfp layer 2 managed switch 24-port 10/100mbps + 2 gigabit tp/sfp managed poe switch 24-port 10/100mbps + 2 gigabit tp/sfp with 12-port poe managed switch 24-port 10/100mbps + 2 gigabit tp/sfp managed ethernet switch
Hide thumbs
Also See for FGSW-2620VM:
- User manual (199 pages) ,
- Specification (3 pages) ,
- Quick installation manual (2 pages)
Table of Contents
Advertisement
1.
For security reason, please change and memorize the new username and password after this
first setup.
Username Max: 6, Min: 1 characters.
Password Max: 6, Min: 1 characters.
2.
Only accept command in lowercase letter under console interface.
5.2 Configure IP address
The FGSW-2620PVM / FGSW2612PVM Managed Switch is shipped with default IP address as following.
IP Address : 192.168.0.100
Subnet Mask : 255.255.255.0
To check the current IP address or modify a new IP address for the Switch, please use the procedures as follow:
Show the current IP address
1.
On "Switch# " prompt, enter "configure".
2.
On "Switch(config)# " prompt, enter "show ip".
3.
The screen displays the current IP address, Subnet Mask and Gateway. As show in
Figure 5-2-1: Show IP information screen
128
User's Manual of FGSW-Series
Figure
5-2-1.
Advertisement
Table of Contents
