Setting The Delay Start - Electrolux FAVORIT 88080 Vi User Manual

30
In daily use
Aborting the rinsing cycle
1. Press the RESET key combination.
On the display: CONFIRM CANCEL ?
2. Press the OK/START button.
The cycle is stopped. On the display: CHOOSE CYCLE
3. If you want to start a new cycle, check whether there is any detergent in the dis
penser.
Turning off the dishwasher will only interrupt a selected dishwashing cycle, not
cancel it. The cycle will recommence after turning the dishwasher back on again.

Setting the delay start

With the delay start you can delay the start of a dishwashing cycle for
between 1 and 19 hours. First of all set the delay start and then the desired dish
washing cycle.
1. Go to the DELAY START option; see section "Adapting an option/setting".
2. Set the period by which you wish to delay the start in hours.
In the symbol line of the display
3. Press the OPTION button, to change to the Programmes menu.
4. Select programme and start.
First of all the pre set time delay until the start runs down. In the display you see
the time remaining until the start of the dishwashing cycle. After the time delay
until the start has elapsed, the dishwashing cycle starts automatically, the
symbol
Cancel delay start:
You can cancel a time delay in progress at any time.
1. Press the RESET key combination.
On the display: CONFIRM CANCEL ?
2. Press the OK/START button.
The delay start is cancelled. The set rinsing cycle will begin.
goes out.
.