Contents Thank you for choosing one of our high-quality products. To ensure optimal and regular performance of your appliance please read this instruction manual carefully. It will enable you to navigate all processes perfectly and most efficiently. To refer to this manual any time you need to, we recommend you to keep it in a safe place.
Safety information Operating instructions Safety information For your safety and correct operation of the appliance, read this manual carefully before installation and use. Always keep these instructions with the appliance even if you move or sell it. Users must fully know the operation and safety features of the appliance. Correct use •...
Product description Installation • Make sure that the appliance is not damaged because of transport. Do not connect a damaged appliance. If necessary, contact the supplier. • Remove all packaging before first use. • A qualified and competent person must do the electrical installation. •...
Control panel Indicator lights Multitab The indicator light shows the activation/deacti- vation of the multitab function. Refer to 'Mul- titab function'. The salt indicator light comes on when it is nec- Salt essary to fill the salt container. Refer to 'Use of dishwasher salt'.
Use of the appliance Function buttons Use the function buttons for these operations: • To set the water softener. Refer to the chapter 'Setting the water softener'. • To deactivate/activate the rinse aid dispenser, when multitab function is active. Refer to the chapter 'Multitab function'.
Use of dishwasher salt 6. Press the function button A one time to increase the water softener level by one step. 7. Press the on/off button to save the operation. Use of dishwasher salt CAUTION! Only use dishwashers salt. Types of salt that are not applicable for dishwashers cause dam- age to the water softener.
Use of rinse aid 1. Press the release button (A) to open the rinse aid dispenser. 2. Fill the rinse aid dispenser with rinse aid. The mark 'max.' shows the maximum level. 3. Remove the spilled rinse aid with an ab- sorbent cloth to prevent too much foam during the subsequent washing pro- gramme.
Loading cutlery and dishes Loading cutlery and dishes Helpful hints and tips CAUTION! Only use the appliance for household utensils that are applicable for dishwashers. Do not use the appliance to clean objects that can absorb water (sponges, household cloths, etc.).
Loading cutlery and dishes The rows of prongs in the lower basket can be flat to load large dishes, pots, pans and bowls. Cutlery basket WARNING! Do not put long-bladed knives in a vertical position. Arrange long and sharp cutlery hori- zontally in the upper basket.
Loading cutlery and dishes Upper basket The upper basket is for saucers, salad bowls, cups, glasses, pots and lids. Arrange the items to let wa- ter touch all surfaces. • For longer items fold the cup racks up. • Put glasses with long stems in the cup racks with the stems up.
Use of detergent 1. Pull out the upper basket until it stops. 2. Hold the upper basket by the handle, lift it as far as possible and lower it vertically. The upper basket latches into the lower or the upper position. Use of detergent Only use detergents (powder, liquid or tablet) that are applicable for dishwashers.
Multitab function 3. If you use a washing programme with pre- wash phase, put more detergent in the prewash detergent compartment (B). 4. If you use detergent tablets, put the de- tergent tablet in the detergent dispenser (A). 5. Close the lid of the detergent dispenser. Press the lid until it locks into position.
Washing programmes To activate the multitab function: • Press the multitab button. The multitab indicator light comes on. To deactivate the multitab function: • Press the multitab button. The multitab indicator light goes off. Do these steps if the drying results are not satisfactory: 1.
Washing programmes Programme Degree of soil Type of load Programme description INTENSIV CARE 70° Heavy soil Crockery, cutlery, Prewash pots and pans Main wash up to 70°C 1 intermediate rinse Final rinse Drying Normal or light Crockery and cutlery Main wash up to 60°C 30 MIN 60°...
Setting and starting a washing programme The pressure and temperature of the water, the variations of power supply and the quantity of dishes can change these values. Setting and starting a washing programme Set the washing programme with the door ajar. The washing programme only starts after you close the door.
Setting and starting a washing programme Setting and starting a washing programme with delay start 1. Press the on/off button. 2. Set a washing programme. 3. Press the delay start button until the display shows on flashing the necessary delay start of the washing programme.
Care and cleaning Care and cleaning WARNING! Switch the appliance off before you clean the filters. Cleaning the filters CAUTION! Do not use the appliance without the filters. Make sure that the installation of the filters is correct. Incorrect installation will cause unsatisfactory washing results and damage to the appliance.
What to do if… Remove the flat filter (C) from the bot- tom of the appliance. Clean the filters below running water. Put the flat filter (C) in the bottom of the appliance. 10. Put the coarse filter (A) in the microfilter (B) and push the filters together.
What to do if… Fault code and malfunction Possible cause and solution • intermittent audible signal • The water tap is blocked or furred with limescale. • digital display shows Clean the water tap. The dishwasher does not fill with •...
Technical data The cleaning results are not satisfactory The dishes are not clean • The selected washing programme is not applicable for the type of load and soil. • The baskets are loaded incorrectly so that water cannot reach all surfaces.
Water connection Obey the instructions in the enclosed template to: • Build-in the appliance. • Install the furniture panel. • Connect to the water supply and drain. Install the appliance under a counter (kitchen worktop or sink). If a repair is necessary, the appliance must be easily accessible for the engineer. Put the appliance adjacent to a water tap and a drain.
Water connection Be careful when you connect the water inlet hose: • Do not put the water inlet hose or the safety valve in water. • If the water inlet hose or the safety valve is damaged, immediately disconnect the mains plug from the mains socket.
Electrical connection If you connect the water drain hose to a trap spi- got under the sink, remove the plastic membrane (A). If you do not remove the membrane, remain- ing food can cause a blockage in the drain hose spigot The appliance has a security feature to prevent that dirty water goes back into the appliance.
WARNING! To discard the appliance, follow the procedure: • Pull the mains plug out of the socket. • Cut off the mains cable and mains plug and discard them. • Discard the door catch. This prevents the children to close themselves inside the appliance and endanger their lives.