13. TECHNICAL INFORMATION................24 WE’RE THINKING OF YOU Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings with it decades of professional experience and innovation. Ingenious and stylish, it has been designed with you in mind. So whenever you use it, you can be safe in the knowledge that you’ll get great results every time.
ENGLISH SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.
Do not keep the appliance door open without • supervision to prevent to fall on it. Before any maintenance operation, deactivate the • appliance and disconnect the mains plug from the socket. Do not use high pressure water sprays and/or steam to •...
Page 5
ENGLISH • Do not put flammable products or items that are wet with flammable products in, near or on the appliance. 2.5 Internal light WARNING! Risk of injury. • This appliance has an internal lamp that comes on when you open the door and goes off when the door is WARNING! closed.
3. PRODUCT DESCRIPTION Top spray arm Rinse aid dispenser Upper spray arm Detergent dispenser Lower spray arm Lower basket Filters Upper basket Rating plate Cutlery drawer Salt container Air vent...
Indicator Description Turbidity Sensor indicator. It comes on when the sensor for the programme operates. When the sensor operates, only this indicator is on. All the other indicators, the display and the programme bar go off. They come on again when the Turbidity Sensor indicator goes off.
Page 9
ENGLISH Programme Degree of soil Programme pha- Options Type of load • Mixed soil • Prewash • EnergySaver • Crockery, cut- • Wash 50 °C and • TimeManager lery, pots and 65 °C • Multitab pans • Rinses • Dry •...
Water Energy Duration Programme (kWh) (min) 9.5 - 10.5 1.10 - 1.30 55 - 65 1) The pressure and the temperature of the water, the variations of the mains supply, the op- tions and the quantity of dishes can change the values.
Page 12
• The display shows the current • The indicator continues to flash. setting: = the rinse aid • The display shows the current dispenser is always activated (factory setting). setting: e.g. = level 4. 3. Press TimeSaver to change the –...
ENGLISH You can only save 1 programme. A new How to set the MyFavourite setting cancels the previous one. programme How to save the MyFavourite Press MyFavourite. • The indicators that are related to programme the MyFavourite programme and 1. Set the programme that you want to options come on.
7.4 XtraPower also the energy consumption (approximately -25%). This option increases the water pressure Dishes can still be wet once the in the prewash and washing phases. programme is completed. The washing results are very good also The duration of the programme will be with heavy soiled loads.
ENGLISH Water and salt can come out CAUTION! from the salt container when Only use rinse aid specifically you fill it. Risk of corrosion. To designed for dishwashers. prevent it, after you fill the salt 1. Open the lid (C). container, start a programme.
Page 16
2. Put the detergent, in powder or Starting a programme with delay tablets, in the compartment (B). start 3. If the programme has a prewash phase, put a small quantity of 1. Set a programme. detergent on the inner part of the 2.
ENGLISH All buttons are inactive except for the Cancelling the programme on/off button. 1. Open the appliance door. 1. Press the on/off button or wait for the 2. Press and hold Reset until the Auto Off function to automatically appliance is in programme selection deactivate the appliance.
10.3 What to do if you want to • Put cutlery and small items in the cutlery drawer. stop using multi-tablets • Put light items in the upper basket. Make sure that the items do not move. Before you start to use separately •...
Page 19
ENGLISH 5. Make sure that there are no residues of food or soil in or around the edge of 1. Turn the filter (B) counterclockwise the sump. and remove it. 6. Put back in place the flat filter (A). Make sure that it is correctly positioned under the 2 guides.
11.2 Cleaning the upper spray 4. To engage again the spray arm to the basket, press the spray arm upwards in the direction indicated by the lower arrow and simultaneously turn it We recommend to clean regularly the counterclockwise until it locks into upper spray arm to avoid soil to clog the place.
Page 21
ENGLISH With some problems, the display to contact an Authorised Service shows an alarm code. Centre. The majority of problems that can occur can be solved without the need Problem and alarm code Possible cause and solution You cannot activate the ap- •...
Page 22
Problem and alarm code Possible cause and solution The options of the program • To save your favourite configuration use option MyFa- have to be set again every vourite. time. Small leak from the appli- • The appliance is not levelled. Loosen or tighten the ad- ance door.
Page 23
ENGLISH Problem Possible cause and solution There are whitish streaks or • The release quantity of rinse aid is too much. Adjust bluish layers on glasses and the rinse aid level to a lower level. dishes. • The quantity of detergent is too much. There are stains and dry wa- •...
Refer to "Before first use", "Daily use" or "Hints and tips" for other possible causes. 13. TECHNICAL INFORMATION Dimensions Width / height / depth (mm) 596 / 818 - 898 / 575 Voltage (V) 220 - 240 Electrical connection...