Setting Or Changing The Start Delay Timer; Load Sensing - Electrolux ESI 662 User Instructions

Setting or Changing the Start Delay
Timer
Using the start delay timer you can adjust when the
wash programme is to begin within the next 19 hours.
Setting the start delay timer:
1. Press the ON/OFF button
2. Keep pressing the DELAY TIMER button
the number of hours of delay until the wash pro-
gramme is to start are flashing on the multi-dis-
play.
3. Press the button for the desired wash programme.
The multi-display now displays the number of
hours without flashing. The number of hours is
saved.
4. The wash programme starts automatically at the
end of the delay set.
Changing the start delay:
As long as the wash programme has not started, you
can still change the start delay set by pressing the
Å
DELAY TIMER button

Load Sensing

If a wash programme is started even though there are
only a few dishes in the upper and/or lower rack, an
intelligent electronic system adjusts the amount of
water and the duration of the wash programme to the
number of dishes. By this means it is possible to
wash only a few dishes quickly and economically. At
half load (6 place settings), up to 2 litres of water and
0.2 kWh of electricity are saved.
a
.
Å
.
until
19