Table of Contents
Advertisement
• Use the OK/START button to switch from the menu item SETTINGS... to the
Settings sub menu.
The Settings sub menu
Here go to the desired setting using the direction buttons (
• LANGUAGE
To set the language of the text line in the display; also see the section "Reset
ting the language".
• WATER HARDNESS
To set the value for water hardness electronically (value range 1 to 10).
• RINSE AID
When option 3 IN 1 is activated: Switch rinse aid addition function on or off.
When option 3 IN 1 is not activated: The rinse aid addition function is always
switched on, even if OFF is selected for RINSE AID.
• SOUND VOLUME
To set the sound volume of the acoustic signals (value range 0 to 5); at 0 the
acoustic signals are switched off.
• BRIGHTNESS
To set the brightness of the display (value range 1 to 10).
• CONTRAST
To set the contrast of the display (value range 1 to 10).
Adjusting an option/setting
1. Go to the option or setting you want to adjust.
2. Press the OK/START button. The value currently selected will flash.
3. Use the direction buttons (
4. Press the OK/START button. The newly selected value will be lit up continuously.
5. You can use the direction buttons (
By pressing OPTION a selected value is entered. The display will show the first
entry in the options/settings menus.
You can use the key combination RESET to cancel a settings procedure.
or
) to select the value required.
or
) to select another option or setting.
Basic operation
or
).
11
Advertisement
Table of Contents
