Table of Contents
Advertisement
16
Prior to using for the first time
Setting the amount of rinse aid required
Only change the amount dispensed, if smears, milky spots (reduce the amount)
or dried on water spots (increase the amount) can be seen on glasses and dishes.
(See section "If dishwashing results are not satisfactory".) The dosage can be set
from 1 6. The dosage is pre set to "4" in the factory.
1. Open the dishwasher door.
2. Press the release button on the rinse aid
compartment.
3. Open the cover.
4. Set the dosage level.
5. Press the lid shut until it clicks into place.
6. If rinse aid has leaked out, wipe it away
with a cloth.
Advertisement
Table of Contents
