Camera - Default; Logout - Planet ICa-H612 User Manual

With the Auto Calibration function, the Speed Dome IP Camera calibrates when the deviation of dome
pivot is detected. Press the button "Set" when finishing setting.
WDR
The WDR function is especially effective in environment with extreme contrast. Press the button "Set"
when finishing the setting.
Stabilizer
With the Image Stabilizer Function, the Speed Dome IP Camera can capture images that would
otherwise be blurred due to the vibration. Press the button "Set" when finishing setting.
2D/3DNR
With the 2D/3D Noise Reduction function, the processor analyzes pixel by pixel and frame by frame to
eliminate environmental noise signal so that the highest quality image can be produced even in low
light conditions. In comparison with 2DNR, 3DNR generates better de-noising effects. Press the button
"Set" when finishing setting.

4.5.12 Camera - Default

In the Camera Default page, users can set the camera back to factory default settings simply by
pressing the "Set Default" button.

4.6 Logout

Press the tab "Logout" in the top of the page, and the login window will pop up. This enables login with
another user name.
- 71 -