Planet ICa-H612 User Manual page 17

STEP 14.
Connecting the AC power adapter with Power Input connector of data cable.
Then according to the practical local power voltage to adjust the power switch, and connect the power
cord with adapter and power outlet.
Use only the power adapter shipped with the unit to ensure correct functionality.
Note
STEP 15.
Connecting the network cable with switch.
STEP 16.
Set your computer's IP address to 192.168.0.x, where x is a number between 1 to 253 (except 20 where
is being used for the camera by default). If you don't know how to do this, please ask your network
administrator.
- 17 -