Motion Detection - Planet ICa-H612 User Manual

The file name suffix will end at the number being set. For example, if the setting is up to "10," the
file name will start from 00, end at 10, and then start all over again.
 Overwrite
The original image in the FTP site will be overwritten by the new uploaded file with a static
filename.
Save
After complete all the settings mentions above, please click on the Save button to save all the
settings in this page.

4.3.8 Motion Detection

Motion Detection function allows detecting suspicious motion and triggering alarms when motion
volume in the detected area reaches/exceeds the determined sensitivity threshold value.
In the Motion Detection setting page, there is a frame (Motion Detection Window) displayed on the
Live View Pane. The Motion Detection Window is for defining the motion detection area. To change the
size of the Motion Detection Window, move the mouse cursor to the edge of the frame and draw it
outward/inward. Moving the mouse to the center of the frame can shift the frame to the intended
location.
Up 10 Motion Detection Windows can be set. Press the "add" button under the Live View Pane to add a
Motion Detection Window. To cancel a Motion Detection Window, move the mouse cursor to the
selected Window, and click on the "delete" button.
- 45 -