Table of Contents
Advertisement
shown in the figure below. Left click on either the "Normal View" or "Full screen" tab for setting image
display mode.
Pan/Tilt Control
Users can implement pan/tilt control by first moving the cursor to the live video pane; then left click
and drag the pointer
Optical/Digital Zoom Control
In Normal View display mode, users can implement zoom in/out by first moving the cursor to the
live video pane and then rotating the mouse wheel. As in Full Screen mode, users can directly rotate
the mouse wheel to zoom in/out on the image. Digital zoom is only available when the function is
activated and which is set in "Camera-Misc1" page under the "PTZ" tab; see section
Miscellaneous Setups Menu 1
automatically switch to digital zoom.
Talk
Talk function allows the local site talks to the remote site. Please refer to section
user > Talk/Listen for further details. This function is only open to "User" who has been granted this
privilege by the Administrator.
Snapshot
Press the
button, and the JPEG snapshots will automatically be saved in the appointed place.
The default place of saving snapshots is: C:\. To change the storage location, please refer to section
4.3.9 Snapshot
for further details.
Speaker
Press the
button to mute/activate the audio.
Video Pause / Restart
Press the
stop button to disable video streaming, the live video will be displayed as
black. Press
the restart button to show the live video again.
Recording
Press the
button to
Zoom Adjustment
Click on the buttons wide/tele to control zoom in/out. Move the cursor closely onto the zoom adjustment
bar and click on the desired position to change the room ratio.
in any direction.
for details. When the camera reaches the limit of its optical range, it will
save video recordings from the Live View to the specified location.
- 29 -
4.5.10 Camera -
4.3.2
Security: Add
Advertisement
Table of Contents
