Gold's Gym XRT 75 GGSY69320 User Manual page 20

51. Wrap the Squat Low Cable (72) over a 90mm
Pulley (78). Attach the Pulley and a Cable Trap
(68) between the second set of holes from the
bottom of the indicated pair of Pulley Plates (63)
with an M10 x 50mm Bolt (100) and an M10
Nylon Locknut (87). Make sure that the Cable
Trap is turned to hold the Cable in the groove
of the Pulley.
52. Wrap the Squat Low Cable (72) under a 90mm
Pulley (78). Attach the Pulley, a 25mm Spacer
(118), and another 90mm Pulley (78) to the indi-
cated bracket on the Long Base (120) with an
M10 x 95mm Bolt (92) and an M10 Nylon Locknut
(87). Make sure the Cable is under the indicat-
ed Pulley.
53. Wrap the Squat Low Cable (72) under a 90mm
Pulley (78). Attach the Pulley and another 90mm
Pulley (78) to the indicated bracket on the Short
Base (2) with an M10 x 75mm Bolt (101) and an
M10 Nylon Locknut (87). Make sure the Cable is
under the indicated Pulley.
54. Wrap the Squat Low Cable (72) over a 90mm
Pulley (78). Attach the Pulley to the first bracket
on the left side of the Butterfly Top Frame (7) with
an M10 x 45mm Bolt (93) and an M10 Nylon
Locknut (87).
55. Wrap the Squat Low Cable (72) over a 90mm
Pulley (78). Attach the Pulley to the second
bracket on the left side of the Butterfly Top Frame
(7) with an M10 x 45mm Bolt (93) and an M10
Nylon Locknut (87).
51
52
53
54
7
55
7
20
63
100
68
87
78
72
72
87
118
78
92
120
72
78
87
101
2
87
78
93
72
87
93
78
72