Modem (Dial-Up); Www.gateway.com - Gateway Notebook User Manual

Modem (dial-up)

Your modem does not dial or does not connect
■ Make sure that the modem cable is plugged into the modem jack
and not the Ethernet network jack. See
sure that the connections have been made correctly.
■
Make sure that your notebook is connected to the telephone line
and the telephone line has a dial tone.
■ Make sure that the modem cable is less than 6 feet (1.8 meters) long.
■ Remove any line splitters or surge protectors from your telephone
line, then check for a dial tone by plugging a working telephone into
the telephone wall jack.
■ If you have additional telephone services such as call waiting, call
messaging, or voice mail, make sure that all messages are cleared and
call waiting is disabled before using the modem. Contact your
telephone service to get the correct code to temporarily disable the
service. Also make sure that the modem dialing properties are set
appropriately.
To check the dialing properties:
1
Click
opens. If your Control Panel is in Category View, click
and Other Hardware
2
Click/Double-click the
the
3
Click the location from which you are dialing, then click
4
Make sure that all settings are correct.
Help and
Support
, then click
Start
.
tab.
Dialing Rules
For more information about dialing properties, click Start,
then click Help and Support. Type the keyword dialing
in the Search box
arrow.

www.gateway.com

"Right" on page 12
. The Control Panel window
Control Panel
Phone and Modem Options
Troubleshooting
to make
Printers
icon, then click
.
Edit
, then click the
117