Installing A Secondary Battery - Gateway Notebook User Manual

Chapter 5: Managing Power
7
Slide a recharged battery into the notebook until it snaps into place.
8
Slide the battery lock to the locked position.
9
Turn your notebook over.
10
Reattach the optional port replicator.
11
Open the LCD panel and press the power button.

Installing a secondary battery

Your notebook's modular bay accepts a secondary battery. The
secondary battery charges when the notebook is connected to
AC power.
Warning
To install a secondary battery:
■ Swap the secondary battery for a bay module by following the
instructions in
68
Danger of explosion if battery is incorrectly replaced.
Replace only with a battery specifically manufactured for
your Gateway notebook. Discard used batteries according
to the manufacturer's instructions.
The battery used in this device may present a fire or
chemical burn hazard if mishandled. Do not disassemble,
heat above 212°F (100°C), or incinerate. Dispose of used
battery promptly. Keep away from children.
"Changing modules" on page
www.gateway.com
46.