What To Do If; Oven Lamp - AEG 49332I-MN User Manual

Hide thumbs Also See for 49332I-MN:
Table of Contents

Advertisement

40

What to do if...

Oven lamp

WARNING!
There is a danger of electrical shock!
Before you change the oven lamp:
• Switch off the oven.
• Remove the fuses in the fuse box or switch off the circuit breaker.
Put a cloth on the bottom of the oven for protection of the oven light and glass cover.
Replacing the oven lamp
1.
You can find the lamp glass cover at the back of the cavity.
Turn the lamp glass cover counterclockwise to remove it.
2.
Clean the glass cover.
3.
Replace the oven lamp with applicable 300°C heat-resistant oven lamp.
Use the same oven lamp type.
4.
Install the glass cover.
WHAT TO DO IF...
WARNING!
Refer to "Safety information" chapter.
Problem
The appliance does not operate
The appliance does not operate
The appliance does not operate
The appliance does not operate
The appliance does not operate
The appliance does not operate
The appliance does not operate
The food boils or fries too slow-
ly
The signal clock does not work
Possible cause
The fuse in the fuse box is re-
leased
The power plug is not correctly
put in
The earth fault switch is
switched off
The Child Lock or Key Lock is on Refer to "Locking/unlocking the
The appliance is not activated
The clock is not set
The "Automatic cut-out" is on
The cookware is not correct for
the heat conductivity
The time is not set
Remedy
Control the fuse. If the fuse is
released more than one time,
refer to a qualified electrician.
Put in the power plug correctly
Switch on the earth fault
switch
control panel"
Activate the appliance
Set the clock
Refer to "Automatic cut-out"
Use correct cookware with
good heat conductivity
Set a time

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents