What To Do If - AEG BS9314001 User Manual

Hide thumbs Also See for BS9314001:
Table of Contents

Advertisement

Installing the door and the
glass panels
When the cleaning is completed, install
the glass panels and the oven door. Do

13. WHAT TO DO IF...

WARNING!
Refer to the Safety chapters.
Problem
The appliance does
not heat up.
The appliance does
not heat up.
The appliance does
not heat up.
The appliance does
not heat up.
The appliance does
not heat up.
The display shows
F111.
The lamp does not
operate.
The lamp does not
operate.
If you cannot find a solution to the prob-
lem yourself, contact your dealer or the
service centre.
8.
9.
Possible cause
The appliance is deactiva-
ted.
The clock is not set.
The necessary settings are
not set.
The Child Lock is activated. Refer to "Activating and
The fuse is released.
The CT Sensor plug is not
correctly installed into the
socket.
The lamp is defective.
You have selected an ECO
function or Moist Fan Bak-
ing . In these functions the
light cannot be activated.
Hold the door glass panels on their
top edge one by one and pull them
up out of the guide.
Clean the glass panel with water
and soap. Dry the glass panel care-
fully.
the above steps in the opposite se-
quence. Install the smaller panel first,
then the larger.
Remedy
Activate the appliance.
Set the clock.
Check the settings.
deactivating the Child Lock
function".
Make sure that the fuse is
the cause of the malfunc-
tion. If the fuse releases
again and again, contact a
qualified electrician.
Put the plug of core tem-
perature sensor as far as
possible into the socket.
Replace the lamp.
The light cannot be activa-
ted because these func-
tions help to save energy.
The necessary data for the service centre
is on the rating plate. The rating plate is
on the front frame of the appliance cavi-
ty.
ENGLISH
43

Advertisement

Table of Contents
loading

Table of Contents