AEG 49332I-MN User Manual page 11

Display
On and Off
Touch for 2 seconds to start the appliance. Touch
Switching the Power function on and off
The Power function makes more power available to the induction cooking zones. The Power
function is activated for 10 minutes at most. After that the induction cooking zone auto-
matically switches back to the highest heat setting. To switch on, touch
To switch off, touch
Automatic Heat Up
You can get a necessary heat setting in a shorter
time if you activate the Automatic Heat Up func-
tion. This function sets the highest heat setting
for some time (see the graphic), and then decrea-
ses to the necessary heat setting.
To start the Automatic Heat Up function for a
cooking zone:
1. Touch
2. Immediately touch
display.
3. Immediately touch
the necessary heat setting comes on. After 3
seconds
To stop the function touch
The induction cooking zone does not sense the cookware
There is a malfunction
A cooking zone is still hot (residual heat)
Key Lock/Child Lock is on
Power function is active
The automatic heat-up function is on
or .
. comes on in the display.
. comes on in the
again and again until
comes on in the display.
.
Hob - Daily Use
Description
for 1 second to stop the appliance.
11
10
9
8
7
6
5
4
3
2
1
0
1 2 3 4
11
, comes on.
5 6 7 8 9