Residual Heat Indicator - AEG 49332I-MN User Manual

locks the control bars.
Locking / unlocking the control panel
You can lock the control panel, but not
setting during a cooking session.
First set the heat setting.
Touch the symbol
The Timer still operates.
Touch the symbol
on.
When you switch off the appliance, you also switch off this function.
When you activate the appliance, SAFE shows up in the oven display.
The locking / unlocking function locks or unlocks the oven interface at the same time.

Residual heat indicator

The residual heat indicator comes on when a cooking zone is hot.
WARNING!
Risk of burns from residual heat!
The child safety device
This function prevents an accidental operation of the hob and oven.
Starting the child safety device
• Start the hob with
• Touch
the symbol "SAFE"on the oven display.
• Stop the hob with
Switching off the child safety device
• Start the hob with
signal appears. The symbol
oven display.
• Stop the hob with
The child safety device function locks the hob and oven at this same time.
Automatic Switch Off
The function stops the hob automatically if:
• all cooking zones are off
• you do not set the heat setting after you start the hob.
• you cover a sensor field with an object (a pan, a cloth, etc.) for longer than 10 seconds.
The sound operates until you remove the object.
• the hob gets too hot (e.g. when a saucepan boils dry). Before you use the hob again, the
cooking zone must be cool.
. The symbol
to switch off this function. The heat setting that you set before comes
. Do not set the heat settings.
for 4 seconds. Acoustic signal appears. The symbol
.
. Do not set the heat settings. Touch
.
.
. It prevents an accidental change of the heat
comes on for 4 seconds.
comes on the hob and the symbol "SAFE" goes out of the
Hob - Daily Use
comes on the hob and
for 4 seconds. Acoustic
13