Yealink SIP-T4X Provisioning Manual page 77

nable =
transfer.blind_
0 or 1
tran_on_hook_
enable =
transfer.on_ho
ok_trans_ena 0 or 1
ble =
transfer.dsske
0,1 or 2
y_deal_type =
transfer.tran_o
thers_after_co 0 or 1
nf_enable =
voice.vad = 0 or 1
voice.cng = 0 or 1
on the LCD screen before displaying
the caller ID.
0-Disabled
1-Enabled
The default value is 1.
It enables or disables the phone to
complete the blind transfer through
on-hook.
0-Disabled
1-Enabled
The default value is 1.
It enables or disables the phone to
complete the attended transfer
through on-hook.
0-Disabled
1-Enabled
The default value is 1.
It defines the line key behavior during
an active call when user presses the
line key and the line key is configured
as a transfer or BLF key.
0-New Call
1-Attended Transfer
2-Blind Transfer
The default value is 2.
It enables or disables the phone to
transfer call to the two parties after a
local conference call hangup.
0-Disabled
1-Enabled
The default value is 0.
It enables or disables the voice activity
detection.
0-Disbaled
1-Enabled
The default value is 0.
It enables or disables the comfortable
noise generator.
Appendix
Transfer
Features->Transfer
->Blind Transfer On
Hook
Features->Transfer
->Semi Attend
Transfer On Hook
Features->Transfer
->Transfer Mode
Via Dsskey
Features->Transfer
->Transfer on
Conference Hang
up
Settings->Voice->
Echo Cancellation
->VAD
Settings->Voice->
Echo Cancellation
71