Yealink SIP-T4X Provisioning Manual page 69

network.802_1
String
x.identity =
network.802_1
String
x.md5_passw
ord =
network.802_1
x.root_cert_url URL
=
network.802_1
URL
x.client_cert_u
rl =
network.vpn_
0 or 1
enable =
network.lldp.e
0 or 1
nable =
Integer
network.lldp.p
acket_interval
from 1 to
=
3600
0 or 1
network.snmp
3-PEAP-MSCHAPv2
4-EAP-TTLS/EAP-MSCHAPv2
The default value is 0.
It takes effect after reboot.
It configures the user name for 802.1x
authentication.
The default value is blank.
It takes effect after reboot.
It configures the password for 802.1x
authentication.
The default value is blank.
It takes effect after reboot.
It configures the access URL of the root
certificates when the 802.1x mode is
configured as EAP-TLS,
PEAP-MSCHAPV2 or
EAP-TTLS/EAP-MSCHAPV2.
It configures the access URL of the
client certificates when the 802.1x
mode is configured as EAP-TLS.
It enables or disables VPN feature.
0-Disabled
1-Enabled
The default value is 0.
It takes effect after reboot.
It enables or disables LLDP feature.
0-Disabled
1-Enabled
The default value is 1.
It takes effect after reboot.
It configures the interval (in seconds)
for the phone to broadcast the LLDP
request.
The default value is 60.
It takes effect after reboot.
It enables or disables SNMP feature.
Appendix
Network->
Advanced->802.1x
->Identity
Network->
Advanced->802.1x
->MD5 Password
Network->
Advanced->802.1x
->CA Certificates
Network->
Advanced->802.1x
->Device
Certificates
Network->
Advanced->VPN->
Active
Network->
Advanced->LLDP->
Active
Network->
Advanced->LLDP->
Packet Interval
(1~3600s)
Network->
Advanced->SNMP
63