Yealink SIP-T4X Provisioning Manual page 114

Yealink SIP-T4X IP Phones Auto Provisioning Guide
features.relog
_offtime =
features.direct
_ip_call_enabl
e =
features.allow
_mute =
features.ringer
_device.is_use
_headset =
features.factor
y_pwd_enabl
e =
features.picku
p.group_picku
p_enable =
features.picku
p.group_picku
108
0-Disabled
1-Enabled
The default value is 1.
Integer It configures the web login timeout (in
minutes).
from 1 to
1000 The default value is 5.
It enables or disables the phone to
make an IP call directly.
0-Disabled
0 or 1
1-Enabled
The default value is 1.
It enables or disables the phone to
mute an active call.
0-Disabled
0 or 1
1-Enabled
The default value is 1.
It configures the ringer device when
the phone receiving an incoming call.
0-Use Speaker
0, 1 or 2
1-Use Headset
2-Use Headset & Speaker
The default value is 0.
It enables or disables the phone to
prompt for the administrator password
when you long press the OK key to
reset the phone to factory defaults.
0 or 1
0-Disabled
1-Enabled
The default value is 0.
It enables or disables the phone to
display the GPickup soft key when the
phone is in the pre-dialing interface.
0 or 1
0-Disabled
1-Enabled
The default value is 0.
String
It configures the group call pickup
Features->General
Information->Auto-
Logout Time
(1~1000min)
Features->General
Information->Allow
IP Call
Features->General
Information->Allow
Mute
Features->Audio->
Ringer Device for
Headset
Features->Call
Pickup->Group Call
Pickup
Features->Call
Pickup->Group Call