Yealink SIP-T4X Provisioning Manual page 23

ring="" specifies the ringtone for this group.
3. For each contact that you wish to add, add the following string to the file. Each
starts on a separate line:
<contact display_name="" office_number="" mobile_number="" other_number=""
line="" ring="" group_id_name="" default_photo=""/>
Where:
display_name="" specifies the name of the contact (This value cannot be blank or
duplicated).
office_number="" specifies the office number of the contact.
mobile_number="" specifies the mobile number of the contact.
other_number="" specifies the other number of the contact.
line="" specifies the line for the contact.
ring="" specifies the ringtone for the contact.
group_id_name="" specifies the group you want to add the contact to.
default_photo="" specifies the photo for the contact (for SIP-T46G IP phone).
4. Specify the values within double quotes.
5. Save the change.
After editing the local contact template file, upload the file to the provisioning server
and then specify the access URL in the configuration file.
The following shows an example of a local contact file used for SIP-T4X IP phones:
<root_group>
<group display_name="All Contacts" ring="" />
<group display_name="Company" ring="Resource:Ring1.wav" />
<group display_name="Family" ring="Auto" />
<group display_name="Friend" ring="" />
<group display_name="Blacklist" ring="" />
<group display_name="Sales" ring="Resource:Ring2.wav" />
</root_group>
<root_contact>
<contact display_name="Jone" office_number="1101"
mobile_number="26584933" other_number="1254856" line="0" ring="Auto"
group_id_name="Company"
default_photo="Defult:default_contact_image.png"/>
<contact display_name="Joy" office_number="1000"
mobile_number="10244588666" other_number="059257000" line="0"
ring="Auto" group_id_name="Sales" default_photo="Config:cutom.png"/>
</root_contact>
Getting Started
17