Yealink SIP-T4X Provisioning Manual page 118

Yealink SIP-T4X IP Phones Auto Provisioning Guide
phone_setting
.predial_auto
dial =
phone_setting
.inter_digit_tim
from 1 to 14
e =
phone_setting
.lock =
phone_setting
.phone_lock .l
ock_key_type
=
phone_setting
.phone_lock.u
nlock_pin =
phone_setting
.phone_lock.lo
ck_time_out =
Ring1.wav,
Ring2.wav,
phone_setting
.ring_type =
Ring8.wav
phone_setting
112
It enables or disables the phone to
automatically dial out the entered
digits in the pre-dialing interface.
0 or 1
0-Disabled
1-Enabled
The default value is 0.
It configures the time (in seconds) for
the phone to automatically dial out the
Integer
entered digits without pressing the
send key.
The default value is 4.
It enables or disables keypad lock
feature.
0-Disabled
0 or 1
1-Enabled
The default value is 0.
It configures the keypad lock type.
0- All Keys
1-Function Key
0, 1 or 2
2- Menu Key
The default value is 0.
It configures the password for
unlocking the keypad.
Integer
The default value is 123.
It configures the interval (in seconds)
to automatically lock the keypad.
Integer
from 0 to The default value is 0 (the keypad can
3600
be locked only by pressing the keypad
lock key).
It configures the ringtone for the
phone.
Example:
phone_setting.ring_type = Ring1.wav
......
The default value is Ring1.wav.
Note: Ring 6-8 are applicable to the
SIP-T46G IP phone only.
Integer
It configures the level of the active
Settings->
Preference->Live
Dialpad
Settings->
Preference->Inter
Digit Time (1~14s)
Features->Phone
Lock->Keypad Lock
Enable
Features->Phone
Lock-> Keypad
Lock Type
Features->Phone
Lock->Phone
Unlock PIN (0~15
Digital)
Features->Phone
Lock->Phone Lock
Time Out (0~3600s)
Settings->
Preference->Ring
Type
Settings->