Yealink SIP-T4X Provisioning Manual page 117

diversion_ena
ble =
Integer
features.hold_
trans_delay =
from 0 to 60
PCMU
PCMA
G729
G722
multicast.code
G723_53
c =
G726_16
G726_24
G726_32
G726_40
multicast.recei
ve_priority.en 0 or 1
able =
multicast.recei
Integer
ve_priority.pri
from 0 to 10
ority =
multicast.listen
_address.X.ip_
address =
String
(X ranges
from 1 to 10.)
multicast.listen
_address.X.la
bel =
String
(X ranges
from 1 to 10)
diversion feature.
0- Disabled
1-Enabled
The default value is 1.
It configures the delay time (in
milliseconds) before transferring a call.
The default value is 0.
It configures the codec of multicast
paging.
The default value is G722.
It enables or disables the phone to
handle the incoming multicast paging
calls when there is a multicast paging
call on the phone.
0-Disabled
1-Enabled
The default value is 1.
It configures the priority of multicast
paging calls.
The default value is 10.
It configures the listening multicast IP
address and port number for the
phone.
The default value is blank.
Example:
multicast.listen_address.1.ip_address
= 224.5.6.20:10008
It configures the label displayed on the
LCD screen when receiving the
multicast paging.
The default value is blank.
Appendix
Information->Diver
sion/History-Info
Features->General
Information->
Multicast Codec
Directory->
Multicast IP->
Paging Priority
Active
Directory->
Multicast IP->
Paging Barge
Directory->
Multicast IP->
Listening Address
Directory->
Multicast IP->Label
111