Yealink SIP-T4X Provisioning Manual page 119

from 1 to 10
.active_backli
ght_level =
(for SIP-T46G
only)
phone_setting
.inactive_back
light_level =
0 or 1
(for SIP-T46G
only)
phone_setting 0, 60, 120,
.backlight_tim 300, 600 or
e = 1800
Ring1.wav
phone_setting
Ring2.wav
.ring_for_tranf
....
ailed =
Ring8.wav
phone_setting
.logon_wizard 0 or 1
=
phone_setting
0 or 1
.is_deal180 =
phone_setting
Integer
.dialnow_dela
from 1 to 14
y =
backlight intensity.
The default value is 8.
It configures the phone to go out or
reduce intensity of the backlight on the
LCD screen after a period of inactivity.
0-Off
1-Low
The default value is 1.
It configures the backlight time (in
seconds).
0-Always on
60-1min
120-2min
300-5min
600-10min
1800-30min
The default value is 0.
It configures the ringtone when the
phone fails to transfer a call.
Note: Ring 6-8 are applicable to the
SIP-T46G IP phone only.
It enables or disables the phone to
show the logon wizard during startup.
0-Disabled
1-Enabled
The default value is 0.
It enables or disables the phone to
deal with the 180 SIP message
received after the 183 SIP message.
0-Disabled
1-Enabled
The default value is 1.
It configures the delay time (in
seconds) for the dial-now rule.
The default value is 1.
Appendix
Preference->
Backlight On
Intensity
Settings->
Preference->
Backlight Idle
Intensity
Settings->
Preference->
Backlight Time
Features->General
Information->
Logon Wizard
Features->General
Information->180
Ring Workaround
Features->General
Information->
Time-Out For
Dial-Now Rule.
113