Yealink SIP-T4X Provisioning Manual page 70

Yealink SIP-T4X IP Phones Auto Provisioning Guide
.enable =
(for SIP-T46G
only)
network.snmp
.port =
(for SIP-T46G
only)
network.snmp
.trust_ip =
IP address
(for SIP-T46G
only)
network.span_
to_pc_port =
sip.reg_surge_
prevention =
from 0 to 60
network.sip.ta
g_mac_to_ua.
enable =
64
0-Disabled
1-Enabled
The default value is 0.
It takes effect after reboot.
It configures the SNMP port.
Integer
The default value is 161.
from 1 to
65535
It takes effect after reboot.
It configures the IP address(es) of the
trusted SNMP server.
Multiple IP addresses are separated
by space.
The default value is blank.
If the value is set to "0.0.0.0", the
phone can accept and handle GET
requests from any IP address.
It takes effect after reboot.
It enables or disables the phone to
span data packets received in the
WAN port to the PC port. If it is
enabled, all packets from WAN port
can be received by PC port.
0 or 1
0-Disabled
1-Enabled
The default value is 0.
It takes effect after reboot.
It configures the maximum duration (in
Integer seconds) for account register after
startup.
The default value is 0.
It enables or disables the phone to
add the MAC address to the
User-Agent header.
0-Disabled
0 or 1
1-Enabled
The default value is 0.
It takes effect after reboot.
->Active
Network->
Advanced->SNMP
->Port (1~65535)
Network->
Advanced->SNMP
->Trusted Address
Network->
Advanced->Span
to PC->Span to PC
Port
Network->
Advanced->
Registration
Random->
Registration
Random (0~60s)