Yealink SIP-T4X Provisioning Manual page 64

Yealink SIP-T4X IP Phones Auto Provisioning Guide
ay =
network.prima
IP address
ry_dns =
network.secon
IP address
dary_dns =
network.pppo
e.user =
(for SIP-T46G
only)
network.pppo
e.password =
(for SIP-T46G
only)
network.ipv6_i
nternet_port.ty
pe =
network.ipv6_
prefix =
from 0 to 128
58
the Internet (WAN) port type for IPv4 is
configured as Static IP Address.
The default value is blank.
It takes effect after reboot.
It configures the primary IPv4 DNS
server when the IP address mode is
defined as IPv4 or IPv4&IPv6, and the
Internet (WAN) port type for IPv4 is
configured as Static IP Address.
The default value is blank.
It takes effect after reboot.
It configures the secondary IPv4 DNS
server when the IP address mode is
configured as IPv4 or IPv4&IPv6, and
the Internet (WAN) port type for IPv4 is
configured as Static IP Address.
The default value is blank.
It takes effect after reboot.
It configures the user name for PPPoE
connection.
String
The default value is blank.
It takes effect after reboot.
It configures the password for PPPoE
connection.
String
The default value is blank.
It takes effect after reboot.
It configures the Internet (WAN) port
type for IPv6 when the IP address
mode is configured as IPv6 or
IPv4&IPv6.
0 or 1
0-DHCP
1-Static IP Address
The default value is 0.
It takes effect after reboot.
It configures the IPv6 prefix when the IP
address mode is configured as IPv6 or
Integer
IPv4&IPv6, and the Internet (WAN) port
type for IPv6 is configured as Static IP
Address.
Gateway
Network->IPv4
Config->Static IP
Address->Primary
DNS
Network->IPv4
Config->Static IP
Address->
Secondary DNS
Network->IPv4
Config->PPPoE->
User Name
Network->IPv4
Config->PPPoE->
Password
Network->IPv6
Config
Network->IPv6
Config->Static IP
Address->IPv6
Prefix (0~128)