Yealink SIP-T4X Provisioning Manual page 143

account.X.adv
anced.timer_t
4 =
Float
(SIP-T46G: X
ranges from 1
from 2.5 to
to 6.
60
SIP-T42G/T41P:
X ranges from
1 to 3.)
account.X.aler
t_info_url_ena
ble =
(SIP-T46G: X
0 or 1
ranges from 1
to 6.
SIP-T42G/T41P:
X ranges from
1 to 3.)
account.X.ring
tone.ring_type
=
Common,
Ring1.wav,
(SIP-T46G: X
Ring2.wav,
ranges from 1
...
to 6.
Ring8.wav
SIP-T42G/T41P:
X ranges from
1 to 3.)
PCMU
account.X.cod
PCMA
ec.Y.payload_
G729
type =
G722
(SIP-T46G: X
G723_53
ranges from 1
G723_63
to 6. Y ranges
from 1 to 12.
G726_16
SIP-T42G/T41P:
G726_24
X ranges from
G726_32
1 to 3. Y
G726_40
ranges from 1
iLBC
to 14.)
GSM
It configures the session timer T4 (in
seconds) for account X.
The default value is 5.
It enables or disables the distinctive
ring tones by the Alert-Info SIP header.
0-Disabled
1-Enabled
The default value is 1.
It configures a ringtone for account X.
Example (configure Ring3.wav for
account 1):
account.1.ringtone.ring_type =
Ring3.wav
The default value is common.
Note: Ring 6-8 are applicable to the
SIP-T46G IP phone only.
It configures the codec for account X.
The default value is:
When Y=1, the default value is PCMU;
When Y=2, the default value is PCMA;
When Y=3, the default value is
G723_53;
When Y=4, the default value is
G723_63;
When Y=5, the default value is G729;
When Y=6, the default value is G722;
When Y=7, the default value is iLBC;
When Y=8, the default value is
G726_16;
Appendix
Account->
Advanced->SIP
Session Timer T4
(2.5~60s)
Account->
Advanced->
Distinctive Ring
Tones
Account->Basic->
Ring Type
Account->Codecs
137