Yealink SIP-T4X Provisioning Manual page 115

p_code =
features.picku
p.direct_picku 0 or 1
p_enable =
features.picku
p.direct_picku String
p_code =
features.picku
p.blf_visual_e 0 or 1
nable =
features.picku
0 or 1
p.blf_audio_e
nable =
features.blf_a
nd_callpark_i
0 or 1
dle_led_enabl
e =
features.idle_t
alk_power_le
0 or 1
d_flash_enabl
e =
code.
The default value is blank.
It enables or disables the phone to
display the DPickup soft key when the
phone is in the pre-dialing interface.
0-Disabled
1-Enabled
The default value is 0.
It configures the directed call pickup
code.
The default value is blank.
It enables or disables the phone to
display a visual alert when the
monitored user receives an incoming
call.
0-Disabled
1-Enabled
The default value is 0.
It enables or disables the phone to
play an audio alert when the
monitored user receives an incoming
call.
0-Disabled
1-Enabled
The default value is 0.
It enables or disables the phone to turn
off the BLF key LED when the
monitored user is idle.
0-Disabled
1-Enabled
The default value is 0.
It enables or disables the power LED
indicator when the phone is idle, in the
pre-dialing screen or during a call.
0-Disabled
1-Enabled
The default value is 0.
Appendix
Pickup Code
Features->Call
Pickup->Directed
Call Pickup
Features->Call
Pickup->Directed
Call Pickup Code
Features->Call
Pickup->Visual
Alert for BLF Pickup
Features->Call
Pickup->Audio
Alert for BLF Pickup
Features->General
Information->LED
Off in Idle
109