Yealink SIP-T4X Provisioning Manual page 73

auto_provision
String
.server.passw
ord =
auto_provision
.dhcp_option. 0 or 1
enable =
auto_provision
.dhcp_option.
String
option60_valu
e =
auto_provision
Integer
.dhcp_option.l
from 128 to
ist_user_optio
254
ns =
auto_provision
.aes_key_16.c String
om =
auto_provision
String
.aes_key_16.m
ac =
autoprovision.
X.name =
(X ranges
String
from 1 to 50.)
(for SIP-T46G
only)
autoprovision.
X.code = String
(X ranges
The default value is blank.
It configures the password for
authentication during auto
provisioning.
The default value is blank.
It enables or disables the phone to
obtain the provisioning server address
by detecting DHCP options.
0-Disabled
1-Enabled
The default value is 1.
It configures the value (vendor name
of the device) of DHCP option 60.
The default value is yealink.
It configures the custom DHCP option
for the provisioning server address.
The default value is blank.
It configures the AES key (16
characters) for decrypting the
Common CFG file.
The valid characters contain: 0 ~ 9, A
~ Z, a ~ z.
The default value is blank.
It configures the AES key (16
characters) for decrypting the
MAC-Oriented CFG file. The valid
characters contain: 0 ~ 9, A ~ Z, a ~ z.
The default value is blank.
It configures the name for the auto
provisioning.
The maximum length of the name is
100 characters.
The default value is blank.
It takes effect after reboot.
It configures the code to trigger auto
provisioning.
The maximum length of the code is 100
Appendix
Settings->Auto
Provision->
Password
Settings->Auto
Provision->DHCP
Active
Settings->Auto
Provision->DHCP
Option Value
Settings->Auto
Provision->Custom
Option (128~254)
Settings->Auto
Provision->
Common AES Key
Settings->Auto
Provision->
MAC-Oriented AES
Key
67