Yealink SIP-T4X Provisioning Manual page 71

syslog.mode 1 or 2
syslog.server
IP address
=
Integer
syslog.log_lev
el =
from 0 to 6
auto_provision
0 or 1
.mode =
auto_provision
0 or 1
.pnp_enable
=
auto_provision
String
.pnp_domain_
name =
auto_provision
.pnp_event_v String
endor =
It configures the phone to export log
files to a syslog server or the local
system.
1-Local
2-Server
The default value is 1.
It configures the IP address or domain
name of the syslog server when the
syslog mode is configured as server.
The default value is blank.
It takes effect after reboot.
It configures the syslog level used to
specify the type of syslog information
to be exported.
0 means no syslog information, and 6
means all.
The default value is 3.
It takes effect after reboot.
It enables or disables the power on
mode for triggering the auto
provisioning process.
0-Disabled
1-Enabled
The default value is 1.
It enables or disables Plug and Play
feature. If it is enabled, the phone will
broadcast PnP SUBSCRIBE messages
to obtain a provisioning server
address after startup.
0-Disabled
1-Enabled
The default value is 1.
It configures the domain name of the
PnP server.
The default value is 224.0.1.75.
It configures the vendor name of the
device.
The default value is yealink.
Appendix
Settings->
Configuration->Exp
ort System Log
Settings->
Configuration->
Server Name
Settings->
Configuration->Sys
tem Log Level
Settings->Auto
Provision->Power
On
Settings->Auto
Provision->PNP
Active
65