Yealink SIP-T4X Provisioning Manual page 66

Yealink SIP-T4X IP Phones Auto Provisioning Guide
network.pc_p
ort.enable =
network.intern
0, 1, 2, 3, 4 or
et_port.speed
_duplex =
network.pc_p
0, 1, 2, 3, 4 or
ort.speed_dup
lex =
network.vlan.i
nternet_port_e
nable =
network.vlan.i
nternet_port_v
60
SIP-T46G (for SIP-T46G)
SIP-T42G (for SIP-T42G)
SIP-T41P (for SIP-T41P)
It enables or disables the PC port.
0-Disabled
0 or 1
1-Enabled
The default value is 1.
It configures the transmission mode
and transmission speed of the Internet
(WAN) port.
0-Auto negotiate
1-Full duplex 10Mbps
2-Full duplex 100Mbps
5
3-Half duplex 10Mbps
4-Half duplex 100Mbps
5-Full duplex 1000Mbps (not
applicable to SIP-T41P)
The default value is 0.
It configures the transmission mode
and transmission speed of the PC
(LAN) port.
0-Auto negotiate
1-Full duplex 10Mbps
2-Full duplex 100Mbps
5
3-Half duplex 10Mbps
4-Half duplex 100Mbps
5-Full duplex 1000Mbps (not
applicable to SIP-T41P)
The default value is 0.
It enables or disables VLAN of the
Internet (WAN) port.
0-Disabled
0 or 1
1-Enabled
The default value is 0.
It takes effect after reboot.
Integer It configures VLAN ID of the Internet
(WAN) port.
from 1 to
Network->Advanc
ed->Port Link->
WAN Port Link
Network->
Advanced->Port
Link->PC Port Link
Network->
Advanced->VLAN
->WAN Port
->Active
Network->
Advanced->VLAN