Yealink SIP-T4X Provisioning Manual page 67

id = 4094
network.vlan.i
Integer
nternet_port_p
from 0 to 7
riority =
network.vlan.
0 or 1
pc_port_enabl
e =
Integer
network.vlan.
from 1 to
pc_port_vid =
4094
network.vlan.
Integer
pc_port_priorit
from 0 to 7
y =
network.vlan.
0 or 1
dhcp_enable
=
Integer
network.vlan.
dhcp_option
from 128 to
=
254
wui.http_enab
0 or 1
le =
The default value is 1.
It takes effect after reboot.
It configures VLAN priority of the
Internet (WAN) port.
The default value is 0.
It takes effect after reboot.
It enables or disables VLAN of the PC
(LAN) port.
0-Disabled
1-Enabled
The default value is 0.
It takes effect after reboot.
It configures VLAN ID of the PC (LAN)
port.
The default value is 1.
It takes effect after reboot.
It configures VLAN priority of the PC
(LAN) port.
The default value is 0.
It takes effect after reboot.
It enables or disables the phone to
obtain VLAN settings from the DHCP
server.
0-Disabled
1-Enabled
The default value is 1.
It takes effect after reboot.
It configures the DHCP option from
which the phone will obtain the VLAN
settings. You can configure at most five
DHCP options, and separate options
by commas.
The default value is 132.
It takes effect after reboot.
It enables or disables the HTTP
protocol for web server access.
0-Disabled
Appendix
->WAN Port->VID
(1-4094)
Network->
Advanced->VLAN
->WAN Port->
Priority
Network->
Advanced->VLAN
->PC Port->Active
Network->
Advanced->VLAN
->PC Port->VID
(1-4094)
Network->
Advanced->VLAN
->PC Port-> Priority
Network->
Advanced->VLAN
->DHCP VLAN->
Active
Network->
Advanced->VLAN
->DHCP VLAN->
Option
Network->
Advanced->Web
Server->HTTP
61