Power Supply; Using The Battery; Connecting To Socket; Connecting Up To Power Supply - Becker TRAFFIC ASSIT 7928 Operating Instructions Manual

>>>

Power supply

> D
At home, the Traffic Assist can be pow-
ered by means of the supplied mains pow-
> GB
er supply unit. In the vehicle, the cable for
> F
the cigarette lighter can be used (also sup-
plied). In both cases, the internal battery
> I
of the Traffic Assist is charged. The power
supply can either be connected directly to
> E
the Traffic Assist, or to the docking sta-
> P
tion.
> NL
Notes:
• Please note that TMC reception is only
> DK
possible when the power supply is con-
nected to the docking station.
> S
• If the unit battery is completely dis-
> N
charged, connect the power supply. It
may take up to a minute before the
> FIN
Traffic Assist can be switched on again.
> TR
> GR
> PL
> CZ
> H
> SK
22

Using the battery

The internal power supply is via the inte-
grated rechargeable battery. The recharge-
able battery is maintenance-free and does
not require any particular care.
Note:
Please note that with a completely dis-
charged battery, the unit requires up to
one minute until it can be switched on
again.

Connecting to socket

!Danger of Death!
Make sure that your hands are not damp
and that the mains section is dry. Only
connect the mains section to a mains
supply with which such purposes are
permitted.

Connecting up to power supply

The mains power supply unit is connected
to the public mains grid as follows:
> Hold the connector and push it, with-
out using excessive force, to the stop in
the relevant connecting socket on the
Traffic Assist or the docking station.