Table of Contents
Advertisement
>>>
NAVIGATIONAL MODE
Displaying TMC messages on
the map
> D
Current TMC messages are displayed on
> GB
the map graphically. Sections of the route
where there are traffic problems are high-
> F
lighted blue. Arrows continue to be dis-
played, which indicate the traffic direction
> I
which is affected by the traffic problem.
> E
In addition to the coloured mark, a warn-
> P
ing sign is displayed on the stretch of road
affected.
> NL
> DK
> S
> N
> FIN
> TR
> GR
> PL
> CZ
> H
> SK
66
Using TMC
Once you have connected the TMC an-
tenna, your Traffic Assist will receive cur-
rent traffic announcements and dynamic
route calculation will be enabled (traffic
jam diversion). You can also view traffic
announcements directly.
To preset the TMC, See "The TMC but-
ton" on page 63.
> In the map display, activate the (see also
page 70) toolbar and press
or
> In the main menu, press
TMC
page 30).
Note:
The button only becomes visible once
you have switched to navigation mode
and then called up the main menu again.
After switching the Traffic Assist with
TMC off and on again via the On/Off
switch, the
button is only visible
TMC
following the procedure described above.
After pressing one of the two buttons, the
message list appears.
You can scroll through the list using the
arrow keys
.
edge of the screen.
(see also
The road number (motorway, A-road or
district roads), section of road if applica-
ble, traffic direction and the type of prob-
lem are displayed in each traffic message.
on the right–hand
Advertisement
Table of Contents
