Function; Connecting The Audio Signal; Connecting Usb Storage Media - Becker TRAFFIC ASSIT 7928 Operating Instructions Manual

>>>
Connecting the telephone
mute function
> D
You can connect your Traffic Assist to
> GB
your audio system using an optionally-
available cable for the telephone mute
> F

function.

If the cable is correctly connected, your
> I
Traffic Assist will mute the car radio dur-
> E
ing navigation announcements.
> P
> NL
> DK
> S
> Insert the jack on the cable into the
socket on the docking station for this
> N
purpose.
> Connect the other end of the cable to
> FIN
the telephone mute socket on your ra-
> TR
dio.
Please observe the manufacturer's con-
> GR
nection specifications.
> PL
> CZ
> H
> SK
28

Connecting the audio signal

You can connect your Traffic Assist to
your audio system using an optionally-
available cable for output of the audio sig-
nal.
If the cable is correctly connected, you can
then output the audio signal via the vehi-
cle audio system.
> Insert the jack on the cable into the
socket on the docking station for this
purpose.
> Connect the other end of the cable to
the audio inputs on your audio system.
Please observe the manufacturer's con-
nection specifications.
Connecting USB storage me-
dia
You can connect a USB memory stick or
an external hard drive to your Traffic As-
sist.
Images, music or videos can then be ac-
cessed from these storage media.
Notes:
• Only external hard drives with a maxi-
mum power consumption of 500mA
may be operated. The hard drive can
only be operated when the Traffic As-
sist is powered via the mains adapter or
via the car power adapter.
• Please note that when using USB
memory sticks to play MP3 files or dis-
play images or videos, the battery ca-
pacity may be considerably reduced
(without external power supply).
The USB port for storage media is located
on the left side of the unit.