Mains Power Supply Unit - Becker TRAFFIC ASSIST PRO Z 250 Operating Instructions Manual

Hide thumbs Also See for TRAFFIC ASSIST PRO Z 250:
Table of Contents

Advertisement

>>>
THE TRAFFIC ASSIST PRO
Accessories
> D

Mains power supply unit

> GB
This power supply allows connection of
the Traffic Assist Pro to a mains outlet.
> F
Requirements for power supply:
Alternating current
> I
• 100-240 V
> E
0.2 Amps
50-60 Hertz
> P
External microphone
> NL
The internal microphone of the Traffic
> DK
Assist Pro may not be able to achieve sat-
isfactory voice quality if the Traffic Assist
> S
Pro is placed unfavourably in the vehicle.
In these cases, please use the optionally
> N
available external microphone. Please con-
> FIN
sult your local specialist dealer.
Details of the connection can be found
> TR
under "Docking station (optional)" on
page 25.
> GR
Note:
> PL
Connection is only possible using the op-
> CZ
tionally available docking station.
> H
> SK
12
External GPS antenna
You can use an external antenna to im-
prove reception in vehicles where only
limited GPS reception is available (not in-
cluded in the scope of supply). Please con-
tact your local stockist for more informa-
tion.
Details of the connection can be found
under "Connecting up external antenna"
on page 25.
Docking station
The optionally available docking station
replaces the carrier plate of the Traffic As-
sist Pro included in the scope of delivery.
There are various connections on the
docking station. These connections can be
used to connect the Traffic Assist Pro to
an audio system already installed in the
vehicle.
Details of the connections on the docking
station can be found under "Docking sta-
tion (optional)" on page 25.
TMC antenna
The dipole antenna for TMC reception
included in the scope of delivery can be re-
placed by the optionally available bow-
shaped TMC antenna.
Details of how to install the bow-shaped
TMC antenna can be found under "TMC
antenna (optional)" on page 24.

Advertisement

Table of Contents
loading

Table of Contents