The Edit Key; The Calculate Key - Becker TRAFFIC ASSIT 7928 Operating Instructions Manual

>>> NAVIGATIONAL MODE
> Switch to the selection between
,
> D
dress Point of interest
by pressing the
map
> GB
button and then enter the intermediate
destination.
> F
> Repeat these entries in the route plan-
ning window for each intermediate des-
> I
tination by pressing
> E
> You can move the individual entries by
pressing the
> P
> Once all the entries have been made in
the route planning window, save the
> NL
destination data by pressing the
> DK
button.
The entry menu appears.
> S
> Give the destination a meaningful
name.
> N
> Press .
OK
> FIN
Route planning is complete. The Routing
options entry window opens.
> TR
> GR
> PL
> CZ
> H
> SK
54

The Edit key

Ad-
or Existing routes can be changed in the Edit
Select on
menu.
Other destination
.
Add
buttons.
> Press the
routes.
The route planning window appears. The
OK
following functions are available:
Key
Add
Delete
OK
key to change existing
Edit
Meaning
This box can be used to
enter a new route point.
This box can be
used to delete a high-
lighted route point.
This box can be used to
save the processed route
and transfer it to rapid
access.
It is possible to scroll up
and down in the lists us-
ing these buttons.
Individual entries can be
moved using these but-
tons.

The Calculate key

A planned route can also be calculated
without GPS reception so that you can get
an overview of the journey.
When doing this, the first route point
specified is used as the starting point for
the route.
Note:
During navigation, your current location
is the starting point used. The first leg is
then the journey to the first route point
specified.
> Press the button
Calculate
total distance and probable length of
the journey calculated for this route.
The Routing options entry window is
opened.
to have the