Traffic Assist - Basic Unit; Cable For Power Supply From Cigarette Lighter; Battery; Usb Connection Cable - Becker TRAFFIC ASSIST Z101 Operating Instructions Manual

>>> THE TRAFFIC ASSIST

Traffic Assist - basic unit

> D The basic unit contains all the electronics:
• an integrated GPS antenna,
> GB
• a TMC receiver for the reception of
> F traffic messages,
• a touchscreen,
> I
• an integrated loudspeaker for the out-
> E put of messages during navigation.
On the sides of the unit, there are also var-
> NL
ious connections and ports.
You will find more details of the unit
under:
• See "Technical Data" on page 64.
8
Cable for power supply from
cigarette lighter
This cable allows the unit to be connected
up to the car's cigarette lighter.
The power supply must satisfy the follow-
ing requirements:
• DC current 12/24 volts
0.5 amps

Battery

When depleted, the integrated rechargea-
ble battery can be recharged by connect-
ing the Traffic Assist to the power supply.
For this purpose, connect the unit via a car
power adapter to a 12/24 V socket in a ve-
hicle or via the optional mains power sup-
ply unit to the 230 V mains.
Note:
You can charge the Traffic Assist via the
car charger cable included in the scope of
delivery or via the optionally-available
mains power supply unit.
When the Traffic Assist is connected to a
PC, it is supplied with power via the PC
and does not consume battery power.

USB connection cable

The USB connection cable can be used to
connect the unit to a standard personal
computer by means of the USB port.
However, to use the data on the PC, you
will first have to install the free "Active
Sync" software from Microsoft

Unit bracket

The Traffic Assist can be mounted in the
vehicle using the unit bracket.

Map data

The map data for navigation is pre-in-
stalled in a 2 GB internal memory.
®
.