Cable For Power Supply From Cigarette Lighter; Battery; Sd Memory Card - Becker TRAFFIC ASSIST 7977 Instructions For Use Manual

>>> THE TRAFFIC ASSIST
Cable for power supply from
cigarette lighter
> EN
This cable allows the unit to be connected
up to the car's cigarette lighter.
The power supply must satisfy the follow-
ing requirements:
• DC current 12 Volts
0.5 amps

Battery

When depleted, the integrated rechargea-
ble battery can be recharged by connect-
ing the Traffic Assist to the power supply.
For this purpose, connect the unit via a car
power adapter to a 12 V plug socket in a
vehicle or via the optional grid power
supply unit to the110 - 230 V grid.
Note:
You can charge the Traffic Assist via the
car charger cable included in the scope of
delivery or via the optionally-available
grid power supply unit.
When the Traffic Assist is connected to a
PC, it is supplied with power via the PC
and does not consume battery power.
12

SD memory card

A memory card is used as a storage medi-
um for road maps, music tracks and imag-
es.
The map data is preinstalled on the card
supplied with the unit. If you intend to
listen to music or view images using the
Traffic Assist, you can save these to the
free space on the memory card. If you re-
quire more memory space, you must save
further images or music tracks to a sepa-
rate card (not included). The separate card
must be formatted with the FAT 16 file
system.
Notes:
If you wish to listen to music using the
Traffic Assist while navigation
underway, it must be stored on the
supplied memory card or a USB storage
medium. The Traffic Assist does not
support the changing of memory cards
during navigation.
When not in the unit, the memory card
must be stored in a protected dry place
away from direct sunlight in the packag-
ing supplied. Avoid touching or dirtying
the contact strip.
You will find more details about the mem-
ory card under:
• "Technical Data" on page 105
CAUTION
The SD memory card is removable.
Keep away from small children as it could
be swallowed.
is