Telephone/Bluetooth Settings; Switching Bluetooth On/Off; Visibility Of The Traffic Assist - Becker TRAFFIC ASSIT 7928 Operating Instructions Manual

Connecting from the device list
You can initiate a connection to a mobile
phone from the device list. If a mobile
phone is already connected, that connec-
tion will be terminated and a connection
will be established to the selected mobile
phone.
> Open the device list.
> Press on the desired mobile phone in
the list.
A connection to the selected mobile
phone will be established. If the connec-
tion is successfully established, the tele-
phone fast access function is displayed.

Telephone/Bluetooth settings

In the telephone/Bluetooth settings, you
can activate Bluetooth®, assign a Blue-
tooth name to your Traffic Assist, set the
visibility of your Traffic Assist, and adjust
the telephone and ringtone volume.
> In the telephone menu, press the
button.
erences
The telephone/Bluetooth settings are dis-
played.
TELEPHONE MODE

Switching Bluetooth on/off

Bluetooth must be switched on in order to
enable automatic connection to a mobile
phone after the Traffic Assist is switched
on (see "Connecting automatically" on
page 82).
> Press the
Bluetooth activated
Pref-
the telephone/Bluetooth settings to
switch Bluetooth on

Visibility of the Traffic Assist

Here you can specify whether other Blue-
tooth devices are to be able to recognise
the Traffic Assist or not during a search.
> Press the
Detectable by other devices
button in the telephone/Bluetooth set-
tings to switch visibility on
.
>>>
> D
> GB
> F
button in
> I
> E
or off .
> P
> NL
> DK
> S
or off
> N
> FIN
> TR
> GR
> PL
> CZ
> H
> SK
83