Cable For Power Supply From Cigarette; Battery; Usb Connection Cable; Unit Bracket - Becker Active.5s EU Operating Manual

Cable for power supply from cigarette

lighter

This cable allows the unit to be connect-
ed up to the car's cigarette lighter.
The power supply must satisfy the
following requirements:
• DC current 12/24 volts
1 amps

Battery

When depleted, the
rechargeable battery can be recharged
by connecting the Navigation device to
the power supply.
For this purpose, connect the unit via a
car power adapter to a 12/24 V socket in
a vehicle or via the optional mains power
supply unit to the 230 V mains.
Note:
You can charge the Navigation device
via the car charger cable included in the
scope of delivery or via the optionally
available mains power supply unit.
When the Navigation
connected to a PC, it is supplied with
power via the PC and does not consume
battery power.

USB connection cable

With the USB connection cable provided,
it is possible to connect the Navigation
device to a standard PC with a USB
interface. The integrated flash memory
of the navigation device and a micro SD
card that may eventually be inserted can
then be addressed by the PC like a
removable storage device.
Note:
integrated Switch the navigation device completely
off, see "Devices with magnetic holders"
on page 26, before connecting the navi-
gation device to the computer.

Unit bracket

The Navigation device can be mounted in
the vehicle using the unit bracket.

Accessories

Mains power supply unit

This power supply allows connection of
the Navigation device to a mains outlet.
device is
THE NAVIGATION DEVICE >>>
15