Transferring Maps; Transmitting Music Tracks, Pictures And Videos; Faults - Becker TRAFFIC ASSIT 7928 Operating Instructions Manual

>>>

Transferring maps

> D The installation software from the DVD
should be used for the transfer. This in-
> GB
volves the following stages:
> switch off Traffic Assist.
> F
> remove memory card and plug into an
> I SD card reading device or the use the
USB cable to connect the Traffic Assist
> E
to the computer.
> boot up the computer and insert the
> P
DVD.
> use the installation program to transfer
> NL
the map required.
> DK
> slide the memory card back into the
Traffic Assist or correctly remove the
> S
USB cable.
> N > switch the Traffic Assist back on. The
new map is available right away
> FIN
> TR
> GR
> PL
> CZ
> H
> SK
36
Transmitting music tracks,
pictures and videos
As the complete European map set occu-
pies virtually all the memory space on the
memory card provided, pictures, music
and videos should be stored on a separate
memory card (not included in scope of de-
livery).
The files can be transferred via a card read-
er or the USB connection.
Note:
Use obvious folder names because these
will help you later when you are trying to
find the file you want in the Traffic As-
sist.

Faults

Faults in the operating system or in the
unit are displayed. If the desired function
cannot then be executed, the Traffic Assist
should be restarted using the On/Off
switch or the reset button.
If the messages reappear or the unit
does not function correctly for any other
reason, please contact your local stockist.
Note:
Never attempt to open the unit yourself.
Please contact your authorised dealer if
you are unable to remedy the fault.