Table of Contents
Advertisement
>>>
NAVIGATIONAL MODE
> D
> GB
> F
> I
A maximum of six POIs are displayed
> E
simultaneously. The example shown has
five POIs, two each from the Restaurant
> P
and Parking categories and one from the
Petrol station category, recognisable by
> NL
the category icons at the left of the
> DK
distance
indications.
indications represent the direct distance to
> S
the POIs.
The stylised road on the left indicates on
> N
which side of the road the POIs are
> FIN
located. The numbering of the POIs refers
to the position of the POIs in the list on
> TR
the right (POI No. 1 appears at the very
bottom of the list).
> GR
> PL
> CZ
> H
> SK
74
To select a POI as a stopover:
> Press the desired POI.
It is set as the stopover and the Traffic
Assist starts route calculation to the
stopover.
To set a POI category:
You can set which categories the Traffic
Assist should take into account when
displaying the POIs.
> Press the POI button.
The current settings are displayed.
The
distance
> Press one of the categories set, e.g.
Petrol station.
The complete category list appears.
> If necessary, scroll in the list and press
one of the categories which you would
like to set as a new category, e.g.
.
way station
The current setting is displayed again, the
category has now been
Petrol Station
replaced by the
Railway station
> Proceed in the same manner for the
other two categories as necessary.
> Finally, press
.
OK
An updated display appears of the POIs
available along the route, which takes into
account the change in categories.
Rail-
category.
Advertisement
Table of Contents
