Changing/Deleting Speed Dial Information - Epson Aculaser CX16NF User Manual

❏ To specify batch transmission settings, select BATCH TIME, press the Select key, and then
continue with step 9.
❏ To specify the modem speed, select MODEM SPEED, press the Select key, and then continue
with step 10.
9. Use the keypad to type in the batch transmission time, and then press the Select key.
The batch transmission settings are specified. Continue with step 11.
Note:
For details on entering/editing text and the characters that can be entered, refer to "Entering Text"
on page 74.
10. Press the u or d key to select the desired modem speed, and then press the Select key.
The modem speed is specified. Continue with step 11.
Note:
If a transmission error occurs, select 14.4 or 9.6 for the modem speed.
11. Press the Back key.
12. Press the Select key.
The entered information is registered with the speed dial number.
Note:
To return to the Fax mode screen, continue pressing the Back key until the Fax mode screen is
displayed.

Changing/Deleting Speed Dial Information

The registered speed dial information can be changed.
1. Press the u or d key to select UTILITY, and then press the Select key.
Note:
For details on selecting a menu, refer to "General Procedure for Specifying Settings in Utility Menu"
on page 13.
2. Press the u or d key to select DIAL REGISTER, and then press the Select key.
3. Press the u or d key to select SPEED DIAL, and then press the Select key.
The SPEED DIAL screen appears.
AcuLaser CX16NF Facsimile User's Guide
Registering Recipients 57